We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Paint drying oven.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Paint drying oven - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Paint drying oven Product List

1~5 item / All 5 items

Displayed results

Near-infrared painting drying furnace "Halogen Lamp Order System"

Designed a high-efficiency dryer using near-infrared halogen lamps! By promoting drying and effects from the inside, it reduces un-dried and un-cured areas! Energy-saving and long-lasting!

Near-infrared halogen lamps promote drying and curing from the inside of the target object, thereby reducing the occurrence of defects such as insufficient drying or curing. Additionally, they reach the required temperature instantly when powered on, allowing for efficient processing in a short time. This contributes to cost reduction through energy savings and is also environmentally friendly. We provide drying and heating performance tailored to the purpose, application, and materials being dried, and we design according to various materials and objectives. ■ Features - Fast response - High-quality infrared radiation unaffected by ambient temperature due to lamp-type radiant heating - Uniform irradiation reduces uneven baking and drying - Contamination-free clean heating, regardless of heating atmosphere such as in air or vacuum - Long lifespan design of approximately 3,000 to 5,000 hours (varies depending on usage environment and output) * For details, please download the PDF or contact us.

  • halo_img2.jpg
  • halo_img3.jpg
  • halo_ill1.jpg
  • halo_cas1.jpg
  • halo_cas6.jpg
  • halo_cas2.jpg
  • halo_cas3.jpg
  • halo_cas4.jpg
  • halo_cas5.jpg
  • Other semiconductor manufacturing equipment
  • Paint drying oven

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Latest Information for 2026!]

Experience the forefront of decarbonization technology, including hydrogen combustion gas burners. Test information is updated daily!

The "Thermal Technology Research Institute," established in May 2023, has conducted numerous tests since its opening. ~ Test Equipment Overview ~ ◇ Painting Drying Furnace (Testing Equipment) Tests can be conducted using equipment that is comparable to actual production sites, utilizing a heat source that combines gas, electricity, and hydrogen. It can accommodate various types of workpieces. 【From February 2026, the hot air zone will support hydrogen combustion! You can check the impact on painting quality.】 ◇ Aluminum Melting Holding Furnace Verification tests for "melt quality" and "melting efficiency" through hydrogen combustion melting are possible. This is an actual machine-based aluminum melting furnace. Melting capacity: 150 kg/h Melting: Hydrogen combustion gas burner Holding: Electric heater ◇ Direct Combustion Deodorization Device (On-site Testing Available) A portable testing device that can conduct tests using actual odors in customer factories. - Treatable components: VOCs (volatile organic compounds) and various other odors. - Treatment capacity/temperature: Max. 1.0 m³N/min / 760℃ ⚪︎ Hydrogen Combustion Gas Burner We have a rich lineup of hydrogen burners. The combustion observation of hydrogen gas burners has received great acclaim. Experience the forefront of efforts toward achieving a decarbonized society.

  • 240401 水素ガスバーナーによる燃焼.png
  • 高温テスト炉.jpg
  • MNB.jpg
  • QCO.jpg
  • イプロス掲載用(2026.2.26) QCO水素ゾーン追加.jpg
  • デモ機.jpg
  • 火炎.png
  • 研究所.png
  • MAP.jpg
  • Heating device
  • Industrial Furnace
  • Drying Equipment
  • Paint drying oven

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to the Quick Curing Oven for Coating Drying Test Equipment

Optimal heat source! Testable with four heat sources. We propose suitable heating equipment for work using gas/electric/hybrid heat sources! Thorough testing can be conducted together with our customers.

QCO Test Equipment ■ You can test the painting and drying processes in an environment close to an actual production site. Temperature measurements of the workpiece can be conducted, allowing for the derivation of optimal heating patterns by changing the heat source. The equipment can accommodate large and long workpieces, so please feel free to consult us about your requirements. ■ Gas hot air & jet heating zone With a jet stream of 350°C and 50m/sec, it can handle not only painting and drying but also other heating applications. Hydrogen combustion is also possible, allowing for the evaluation of its impact on products. Load capacity: 800W x 800D x 1400H (maximum) 50kg/hanger (maximum) Conveyance method: Trolley conveyor (hanger pitch 300mm) Conveyance speed: 1 to 10 m/min Painting booth: No-pump type Drying furnace: Gas infrared burner (bottom 23kW x 2, sides 35kW x 2, Max. 800°C) Gas far-infrared panel (116kW x 1 Max. 350°C) Gas hot air & jet heating (233kW x 1, Max. 350°C, 50m/sec) *1 Electric infrared heater (bottom 11kW x 2, sides 17.5kW x 2, Max. 800°C) *1 Please consult us regarding hydrogen combustion.

  • QCO2.jpg
  • QCO.png
  • 表紙.jpg
  • MAP.jpg
  • Heating device
  • Drying Equipment
  • Industrial Furnace
  • Paint drying oven

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of Low-Carbon Coating Equipment [Coating Drying Oven/Exhaust Gas Treatment Device]

At Seiei Manufacturing, we are proposing low-carbon painting drying ovens to respond to a decarbonized society.

At Shoei Manufacturing, which has extensive experience with painting drying ovens and exhaust gas treatment systems, we offer a lineup of "hydrogen combustion type" and "electric heater type." By using "renewable energy sources" and "hydrogen fuel," we can achieve decarbonization. Even if these options are not currently available, we can adapt to the uncertain future of energy supply by introducing: - A hybrid type that electrifies part of the heat source configuration - Hydrogen gas burners that can also use city gas/propane gas. 【Painting Baking Drying Oven】 Hot Air Zone (100–250°C) ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" Radiant Baking Heating Zone (700–850°C) ⚪︎ Electric infrared heater ⚪︎ Hydrogen combustion burner Water Removal Drying Oven (100–150°C) / Booth Heating ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" 【Exhaust Gas Treatment System / VOC Treatment】 ⚪︎ Electric catalytic deodorization device (CT) ⚪︎ Electric regenerative thermal oxidizer (RTO) Our Thermal Technology Research Institute is equipped with a painting drying test oven (QCO) with a painting booth.

  • 電化.png
  • 水素特集.png
  • #2 FWヒーター.jpg
  • AH-E1.png
  • Painting Machine
  • Drying Equipment
  • Heating device
  • Paint drying oven

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Painting Drying Test Equipment】The hot air zone is now compatible with hydrogen combustion!

We are pleased to announce that hot air heating using a hydrogen burner has become possible in the hot air zone of the paint drying furnace (QCO)!

In our company's thermal technology research institute, we have a hybrid painting and drying test furnace (Quick Curing System: QCO) that can accommodate various sizes of workpieces, as well as a complete painting booth and guns! We can conduct various thermal equipment studies, including painting and drying. Additionally, we have recently made it possible to heat the hot air zone of the painting and drying furnace (QCO) using a hydrogen burner. With simple operation, it is possible to switch between LPG and hydrogen for combustion.

  • イプロス掲載用(2026.2.26) QCO水素ゾーン追加.jpg
  • イプロス掲載用(2026.2.26)装置組立図.jpg
  • Industrial Furnace
  • Hot air generator
  • Drying Equipment
  • Paint drying oven

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration